The development of modern and complex haul trucks has made the procedure of hauling cars appear to be a new concept. In truth is that, towing has been there for as long as there were automobiles on roads. The creation of motor vehicles necessitated the invention of towing. The difference here is that during the earlier days, it was done differently and in a very primitive manner. This is worth knowing about Buffalo NY towing company.
In fact, the first vehicles were towed using ropes and human labor. A group of six men were used to pull disabled vehicles from location to another. However, given the amount of time this process took and how laborious it was, it became apparent that a better method was needed. That is why the first tow trucks were invented.
The early models of tow trucks used hooks and chains, which they wrapped around the axle of frame rail of the vehicle that needed to be towed. With invention of better tow trucks, the application of this method has dropped significantly. However, there are certain situations where this method is still used by some service companies. This method is secure, but it involves a lot of time and may cause scratches to the towed vehicle.
There is a better technique that involves use of tire- or wheel-lift devices. These do not destroy the build of the towed vehicle in any way. They only get in contact with tires. In this technique, there is installation of brackets at the front and the rear of the wheels prior to being held intact by use of steel pins. The brackets then clasp the wheels once the tow truck lifts the automobile.
New inventions continue to be unveiled in this industry. The latest invention is the integrated lift, which is also known as the self-loading wrecker. The integrated lift is a wheel-lift system that gets controlled from inside the truck before being deployed with hydraulic power. The truck has a long arm called a stinger which extends from the back.
The wheel crib from the stinger arm usually slides beneath the vehicle beyond the tire then the brackets are closed using hydraulics. This holds the tires on both sides. Then the tow boom is lifted by the truck. This lifts the drive wheels off the ground. With this done, the connection is done and the tow truck is ready to drag the vehicle away safely.
There are cases where tow trucks are not necessary. At times, a flatbed system is needed for the job. Trucks fitted with flatbed system use electric cables to drag cars onto the bed. The flatbed may be turned to the side or tilted using hydraulics to enable the vehicle to be loaded. After vehicle has been loaded, the truck is put back into driving position.
Flatbeds are used in cases where the vehicle that needs to be towed is too heavy or too damaged for a standard tow truck. In case the vehicle has to be towed while the drive wheels are rolling, severe damage will caused to the transmission. Flatbeds are usually the best for use in such cases.
In fact, the first vehicles were towed using ropes and human labor. A group of six men were used to pull disabled vehicles from location to another. However, given the amount of time this process took and how laborious it was, it became apparent that a better method was needed. That is why the first tow trucks were invented.
The early models of tow trucks used hooks and chains, which they wrapped around the axle of frame rail of the vehicle that needed to be towed. With invention of better tow trucks, the application of this method has dropped significantly. However, there are certain situations where this method is still used by some service companies. This method is secure, but it involves a lot of time and may cause scratches to the towed vehicle.
There is a better technique that involves use of tire- or wheel-lift devices. These do not destroy the build of the towed vehicle in any way. They only get in contact with tires. In this technique, there is installation of brackets at the front and the rear of the wheels prior to being held intact by use of steel pins. The brackets then clasp the wheels once the tow truck lifts the automobile.
New inventions continue to be unveiled in this industry. The latest invention is the integrated lift, which is also known as the self-loading wrecker. The integrated lift is a wheel-lift system that gets controlled from inside the truck before being deployed with hydraulic power. The truck has a long arm called a stinger which extends from the back.
The wheel crib from the stinger arm usually slides beneath the vehicle beyond the tire then the brackets are closed using hydraulics. This holds the tires on both sides. Then the tow boom is lifted by the truck. This lifts the drive wheels off the ground. With this done, the connection is done and the tow truck is ready to drag the vehicle away safely.
There are cases where tow trucks are not necessary. At times, a flatbed system is needed for the job. Trucks fitted with flatbed system use electric cables to drag cars onto the bed. The flatbed may be turned to the side or tilted using hydraulics to enable the vehicle to be loaded. After vehicle has been loaded, the truck is put back into driving position.
Flatbeds are used in cases where the vehicle that needs to be towed is too heavy or too damaged for a standard tow truck. In case the vehicle has to be towed while the drive wheels are rolling, severe damage will caused to the transmission. Flatbeds are usually the best for use in such cases.
About the Author:
Buffalo NY towing company provides a comprehensive service to all car owners. To contact these experts for your tire change go to http://www.towingbuffalo.com/flat-tire-tire-change.
0 comments:
Post a Comment