Having all the right preventative procedures completed on your vehicle is the best way to keep it running in the best manner, no matter how old it is. Oil changes Cedar Park can be done at any automotive company and this will include a filter, no less than four quarts as well as a 24 point inspection in most businesses. Below is what should be expected when this is completed.
A fluid change is done every three thousand miles on newer cars, and around every four to five thousand miles for older ones. This is because on newer vehicles, the wear on pistons and the engine compartment is less than on older vehicles. Therefore newer ones must have this done more frequently than older ones.
Your vehicle will be put onto a lift and lifted into the air or pulled over an open floor with grating. This is only so that the workers could gain access to the lower engine compartment from the under side of the vehicle where the drain plug is. This is where all changes will start.
The rain pan will be put under the plug that is to be removed so that any fluids that drain are not able to get down to the floor or cause a slip hazard. Once the plug is taken out and the fluid is gone, a filter wrench is used to remove the filter from the engine area it sits on. This is pulled off in a counter clockwise motion, and a new filter can be put on. Prior to this happening, a tiny amount of fluid is put directly on the ring inside so there is no chance of a leak forming due to an escape area being present.
Now more fluid can be replaced, and depending on your vehicle it could take anywhere from four to six quarts to refill it. Small four cylinder engines will take the lower end while eight cylinder vehicles will take more than this to be full. Once filled, the levels will be checked and more added if it is not at the full mark. Most shops will then do a 24 point check prior to releasing your vehicle.
Your inspection will normally include them looking at the transmission and wiper fluid levels, air pressure in all four tires and looking for ungreased undercarriage areas. Those workers check for any kind of leak while they are beneath your vehicle. If they find any problems, you will be told before you leave.
When you are trying to locate a company to take your car or truck to, you should find out what all is included in their basic pricing schedule. Many include nothing but materials for the exchange, and some others will even give tire rotations or other free services as a means of drawing in business. It is ideal to get the most out of your dollar while still using someone with a good reputation.
If you are interested in finding the best shop to have this done at, call around to ask if there are ASE certified mechanics available. These are individuals that have been professionally trained to work on vehicles and are able to give you the correct information about anything wrong with your car. For more details, consult a trusted mechanic.
A fluid change is done every three thousand miles on newer cars, and around every four to five thousand miles for older ones. This is because on newer vehicles, the wear on pistons and the engine compartment is less than on older vehicles. Therefore newer ones must have this done more frequently than older ones.
Your vehicle will be put onto a lift and lifted into the air or pulled over an open floor with grating. This is only so that the workers could gain access to the lower engine compartment from the under side of the vehicle where the drain plug is. This is where all changes will start.
The rain pan will be put under the plug that is to be removed so that any fluids that drain are not able to get down to the floor or cause a slip hazard. Once the plug is taken out and the fluid is gone, a filter wrench is used to remove the filter from the engine area it sits on. This is pulled off in a counter clockwise motion, and a new filter can be put on. Prior to this happening, a tiny amount of fluid is put directly on the ring inside so there is no chance of a leak forming due to an escape area being present.
Now more fluid can be replaced, and depending on your vehicle it could take anywhere from four to six quarts to refill it. Small four cylinder engines will take the lower end while eight cylinder vehicles will take more than this to be full. Once filled, the levels will be checked and more added if it is not at the full mark. Most shops will then do a 24 point check prior to releasing your vehicle.
Your inspection will normally include them looking at the transmission and wiper fluid levels, air pressure in all four tires and looking for ungreased undercarriage areas. Those workers check for any kind of leak while they are beneath your vehicle. If they find any problems, you will be told before you leave.
When you are trying to locate a company to take your car or truck to, you should find out what all is included in their basic pricing schedule. Many include nothing but materials for the exchange, and some others will even give tire rotations or other free services as a means of drawing in business. It is ideal to get the most out of your dollar while still using someone with a good reputation.
If you are interested in finding the best shop to have this done at, call around to ask if there are ASE certified mechanics available. These are individuals that have been professionally trained to work on vehicles and are able to give you the correct information about anything wrong with your car. For more details, consult a trusted mechanic.
0 comments:
Post a Comment