The most impressive work on a car can be the final painting job done on it. Painting cubicles that produce properly painted cars meet some set standards for the automotive spray booth. For any booth to be termed as good, there are several things that should be considered. When cars are painted in standard painting cubicles, they come out looking exactly as what was expected.
Any car that is painted in a painting cubicle that has an environment which meets the standards for proper painting job and standards for emission control will be considered as a quality painted car. The painting of any car ought to be done in a well-controlled area that will allow for a perfect paint job to be done. The following are qualities of a good painting cubicle.
There ought to be minimal dust within the booth. The dust that is produced in a body shop because of the activities that go on can negatively affect the final paint job if allowed to escape into the painting cubicle. The workers should make sure that the dust on the surfaces of the cars is wiped out, and appropriate coating of paint is applied to prevent any dust. Good booths have the following; sealed doors and very solid floors, there is no frequent movement in and out, the pressure inside is closely measured, and it is clean, and there is no debris around.
The quality of the cubicle lighting needs to be better than that of the outside. For workers to work efficiency and finesse, the lighting needs be good. The painting of any car ought to be free from any flaws. The painters should manage to stop the flaws and correct them before the car leaves the booth. Any missed areas should be visible for the painters to paint them.
A good painting cubicle should prevent over-spray effectively. Installed Downdraft system will help in the prevention of the over-spray that may cause wastage of paint which is very costly to body shops. The system will pull paint away from the unwanted areas, in any case, the painters unintentionally over-spray. Cubicles that are properly ventilated will save on cost of painting because it saves paint
A good booth should manage to reduce the toxic fumes that are emitted from paints. Although most body shops try to use paints that emit fewer fumes that might affect the environment, it is difficult to eliminate the fumes. So it is good to have painting cubicles that are well designed to reduce and contain the harmful fumes. The ventilation on the cubicle should direct the poisonous fumes away from the workers, people around and even away from the neighboring buildings.
The safety of the cubicle will ensure that the workers are always distant from harming themselves. The tools and the safety suits that the painters wear when doing their job should be of standard. The environment inside cubicle should allow for the workers to work without worry of being in danger.
Working within the regulations is a good way of building your reputation. For anyone who wants a paint job for their cars, it is recommended to go complying body shops that guarantee good outcomes. Most of the body shops that cut corners always break the municipality rules and regulations. Do not go for shops without painting cubicle.
Any car that is painted in a painting cubicle that has an environment which meets the standards for proper painting job and standards for emission control will be considered as a quality painted car. The painting of any car ought to be done in a well-controlled area that will allow for a perfect paint job to be done. The following are qualities of a good painting cubicle.
There ought to be minimal dust within the booth. The dust that is produced in a body shop because of the activities that go on can negatively affect the final paint job if allowed to escape into the painting cubicle. The workers should make sure that the dust on the surfaces of the cars is wiped out, and appropriate coating of paint is applied to prevent any dust. Good booths have the following; sealed doors and very solid floors, there is no frequent movement in and out, the pressure inside is closely measured, and it is clean, and there is no debris around.
The quality of the cubicle lighting needs to be better than that of the outside. For workers to work efficiency and finesse, the lighting needs be good. The painting of any car ought to be free from any flaws. The painters should manage to stop the flaws and correct them before the car leaves the booth. Any missed areas should be visible for the painters to paint them.
A good painting cubicle should prevent over-spray effectively. Installed Downdraft system will help in the prevention of the over-spray that may cause wastage of paint which is very costly to body shops. The system will pull paint away from the unwanted areas, in any case, the painters unintentionally over-spray. Cubicles that are properly ventilated will save on cost of painting because it saves paint
A good booth should manage to reduce the toxic fumes that are emitted from paints. Although most body shops try to use paints that emit fewer fumes that might affect the environment, it is difficult to eliminate the fumes. So it is good to have painting cubicles that are well designed to reduce and contain the harmful fumes. The ventilation on the cubicle should direct the poisonous fumes away from the workers, people around and even away from the neighboring buildings.
The safety of the cubicle will ensure that the workers are always distant from harming themselves. The tools and the safety suits that the painters wear when doing their job should be of standard. The environment inside cubicle should allow for the workers to work without worry of being in danger.
Working within the regulations is a good way of building your reputation. For anyone who wants a paint job for their cars, it is recommended to go complying body shops that guarantee good outcomes. Most of the body shops that cut corners always break the municipality rules and regulations. Do not go for shops without painting cubicle.
About the Author:
You can get excellent tips for choosing an automotive spray booth manufacturer and more information about a reliable manufacturer at http://sprayzone.net now.
0 comments:
Post a Comment